Heliport Floodlight  

 Product Description  

• The Surface Floodlights are designed to satisfy all the ICAO required performances: they will provide the correct Touchdown and Lift-Off area illumination, as alternative or as integration of the perimeter lights, with a minimum of 10 cd/m2, the maximum height is 13cm, less than the required 25cm, to increase safety during hovering/ final approach operations, the two pivoting lamp holders provides the correct illuminations in any installation, aside from helipad shape and light positioning defenses on the lamp prevent the pilot from dazzling or direct light.
• The floodlights are normally installed along the perimeter of the Touchdown and Lift-Off area. They can be fixed on a special base by means of screws or bolts, or directly to the ground and must be carefully oriented, in order to achieve the most effective spreading of the light.

Operating environment

• Rated operating temperature from -40 °C up to +60 °C.
• The ingress protection rating is IP 68
• The impact protection rating is IK 10

Certified to Latest Standards

• FAA AC 150/5345-46D L-852E, L-852F, F-852T
• ICAO Annex 14 circular guidance 5.3.6, 5.3.9.8, 5.3.9.9
• CAA CAP168
• BS3224 Part 5, inset fittings
• IEC 61827
• STANAG 3316 Annex C fig 3